Seta Silver and Copper Corrosion Bath - 11405-0

Methods
ASTM D130
ASTM D4048
ASTM D4814
ASTM D7667
ASTM D7671
IP 112
IP 154
IP 611
BS EN ISO 2160 & BS 2000-154 & ISO 2160
DIN EN ISO 2160
ISO 2160

The Seta Silver and Copper Corrosion Bath is a bench top, stainless steel water or oil bath. Digitally controlled to ±0.1 °C over a temperature range of ambient +5 °C to 150 °C, the bath is used to determine the corrosive effects of fuels, lubricants and other hydrocarbon products on copper and silver.

The bath features 6 test stations, each with a lid and hook for suspending a Corrosion Pressure Vessel (11500-0) or a test tube Support Assembly (11422-0). You can use any combination of copper corrosion vessels and test tube supports for maximum test flexibility.

View accessories required for each test method >

Learn more about corrosion testing >

Seta Silver and Copper Corrosion Bath - 11405-0

Features

  • Ambient +5 to 150 °C
  • 22 litre bath
  • 6 test stations
  • Programmable digital temperature controller
  • Digital timer
  • Over temperature cut out and liquid level float switch
  • Maximum liquid level outlet fitting
  • Small footprint

Additional Information

Ease of use:
All functions on the Silver and Copper Corrosion bath are accessed via the dial and indicator icons are shown on the colour display of the thermostir.

Enhanced safety:
Safety features include a float-operated low liquid level cut out. Users are made aware if the level of liquid in the bath falls below the allowable level with a warning display on the thermostir screen and an audible alarm, the heater automatically switches off.
An adjustable over-temperature cut out protects the instrument from overheating. If the bath temperature exceeds the over-temperature cut out temperature, again a warning displays on the thermostir screen, an audible alarm sounds and the heater automatically switches off.

Calibration and verification:
Calibration of the Corrosion Bath can be performed in the field, eliminating the costs and time associated with sending the instrument to a service centre.

Service and maintenance:
The rugged design ensures minimal operational maintenance is needed.

Supplied with: 6 x lids, mains lead, instruction manual.
Temperature rangeAmbient +5 to 150 °C
Stability±0.1 °C
Bath fluidWater or Oil
Bath capacity22 litres
Apertures6 x 52 mm
Heater power1500 W
Voltage110/120 V, 50/60 Hz 200/220 V, 50/60 Hz
Size (HxWxD)51 x 23 x 46 cm
Weight13.3 kg
CCCN CodeTariff 84198998

Methods

ASTM D130
ASTM D4048
ASTM D4814
ASTM D7667
ASTM D7671
IP 112
IP 154
IP 611
BS EN ISO 2160 & BS 2000-154 & ISO 2160
DIN EN ISO 2160
ISO 2160
ASTM D4814 General Specification for Automotive Spark Ignition Engine Fuels
BS EN ISO 2160 & BS 2000-154 & ISO 2160 Copper Corrosion from Petroleum Products by the Copper Strip Tarnish Test
ASTM D4048 Standard test method for detection of copper corrosion from lubricating grease
IP 112 Determination of corrosiveness to copper of lubricating grease - Copper strip method
ISO 2160 Petroleum products - Corrosiveness to copper - Copper strip test
IP 154 Corrosiveness to Copper - Copper Strip Test
ASTM D130 Standard Test for Corrosiveness to Copper from Petroleum Products by Copper Strip Test
ASTM D7671 Corrosiveness to Silver by Automotive Spark–Ignition Engine Fuel–Silver Strip Method
IP 611 Corrosiveness to silver of automotive gasoline - Silver strip method
ASTM D7667 Corrosiveness to Silver by Automotive Spark-Ignition Engine Fuel—Thin Silver Strip Method
DIN EN ISO 2160 Petroleum products. Corrosiveness to copper. Copper strip test