Aviation
chevron_rightProduct
SetaVap4 Automatic Vapour Pressure Analyser with Digital Density - 80607-2
Methods
ASTM D4052
ASTM D5188
ASTM D5191
ASTM D6377
ASTM D6378
ASTM D6897
ASTM D8009
IP 365
IP 394
EN 13016-1
EN 13016-3
ISO 12185
The SetaVap4 Vapour Pressure Analyer with Digital Density combines density and vapour pressure testing in a single unit. The fully automated vapour pressure analyser provides fast, reliable and precise analysis of a wide range of volatile liquids, including gasoline, solvents and light crude oil. The immediate and simultaneous measurement of vapour pressure and density allows for a reduction in lost light ends for volatile liquid measurements for greater density measurement accuracy.
The measurement system uses a piston based design in compliance with triple and single expansion test methods and regulations, reporting DVPE, RVP, EPA and CARB calculations. For precise results, the minimum dead volume design reduces sample carryover and a fully automated test sequence removes possible operator bias.
The fully ASTM D4052 compliant Seta Digital Density accessory can be integrated within the instrument. The density sensor uses a temperature and humidity controlled oscillating U-tube, allowing for consistent performance across all laboratory testing conditions. The combination of our DensAI technology and built-in HD camera allows for seamless automatic bubble detection.
SetaVap4 Automatic Vapour Pressure Analyser with Digital Density - 80607-2
Features
- Accurate and precise density measurement
- Fully compliant to ASTM D4052
- Automatic Bubble Detection using our patented DensAI technology
- Density measurement via glass oscillating U-tube User friendly density calibration screen
- Rapid combined automated vapour pressure testing and density measurement
Information
Details
Ease of use:The SetaVap4 with Digital Density features a simple interface with large colour touchscreen display. An integrated HD camera allows for seamless automatic bubble detection more accurate than the human eye.
Calibration and verification:
Calibration of the SetaVap4 with Digital Density can be performed in the field, eliminating the costs and time associated with sending the instrument to a service centre.
Service and maintenance:
The rugged design ensures minimal operational maintenance is needed.
Details
| ASTM D5191 | Standard test method for vapor pressure of petroleum products (mini method) |
|---|---|
| IP 394 | Liquid petroleum products - Vapour pressure - Part 1: Determination of air saturated vapour pressure (ASVP) |
| ASTM D5188 | Standard test method for vapor-liquid ratio temperature determination of fuels (evacuated chamber method) |
| ASTM D6378 | Determination of vapor pressure of petroleum products, hydrocarbons, and hydrocarbon-oxygenate mixtures (triple expansion method) |
| ASTM D4052 | Method for Density, Relative Density, and API Gravity of Liquids by Digital Density Meter |
| IP 365 | Density and Relative Density of Liquids by Digital Density Meter |
| ISO 12185 | Crude petroleum and petroleum products -- Determination of density -- Oscillating U-tube method |
| ASTM D6377 | Determination of Vapor Pressure of Crude Oil: VPCRx?(Expansion Method) |
| ASTM D6897 | Determination of Vapor Pressure of Liquefied Petroleum Gases (LPG) (Expansion Method) |
| EN 13016-3 | Determination of vapour pressure and calculated dry vapour pressure equivalent (DVPE) (Triple Expansion Method) |
| EN 13016-1 | Determination of air saturated vapour pressure (ASVP) and calculated dry vapour pressure equivalent (DVPE) |
| ASTM D8009 | Standard Practice for Manual Piston Cylinder Sampling for Volatile Crude Oils, Condensates, and Liquid Petroleum Products |
Details
| Unit of density | Kg/m3 |
|---|---|
| Density range | 0 kg/m3 – 1200 kg/m3 |
| Density resolution | 0.01 kg/m3 |
| Density repeatability | 0.01 kg/m3 for Distillates and oils, 0.03 kg/m3 for Gasolines (cold and warm) |
| Temperature range | 10 °C to 40 °C (50 F to 104F) |
| Measurement type | Glass Oscillating U-tube |
| Bubble detection method | Automatic Bubble Detection using DensAI |
| Size (DxHxW) | 12 x 8 x 12 cm additional to the Vap4 80600-2 |
| Weight | 0.6 kg additional to the Vap4 80600-2 |
Methods
ASTM D4052
ASTM D5188
ASTM D5191
ASTM D6377
ASTM D6378
ASTM D6897
ASTM D8009
IP 365
IP 394
EN 13016-1
EN 13016-3
ISO 12185
Spares and accessories for SetaVap4 Automatic Vapour Pressure Analyser with Digital Density - 80607-2
Download product profile
To view our full range of products, download our latest Product Profile here.
Want to know more?
View our full range of products, or simply get in contact with us for more information.
