Seta Reid Vapour Pressure Bath - 22210-4

Methods
ASTM D323 Procedures A & C & D
ASTM D1267
ASTM D4953 Procedure A
IP 69 Procedures A & C & D
IP 410
BS EN ISO 4256 & BS 2000-410
BS ISO 3007 & BS 2000-69

The Seta Reid Vapour Pressure Bath is a floor standing water bath specifically designed for the determination of vapour pressure with Seta Reid or Seta Vapour pressure cylinders.

Seta Reid Vapour Pressure Bath - 22210-4

Features

  • Accepts up to 6 pressure cylinder assemblies
  • Temperature range ambient +5 °C to 90 °C (194 °F) ± 0.1 °C
  • Uniformity better than ± 0.1 °C @ 37.8 °C ( ± 0.2 °F @ 100 °F)
  • Digital temperature control
  • Low fluid level and over-temperature protection

Additional Information

The stainless steel 80 litre water bath has a temperature range of ambient +5 °C to 90 °C and can achieve a test temperature of 37.8 °C (100 °F) with a uniformity of ±0.1 °C (0.2 °F).

A programmable, digitally controlled thermostir unit combines the functions of heater, temperature controller, timer and stirrer. The thermostir unit is equipped with an RS 232 port, a switched output for an external relay, a socket for an external PT100 temperature probe and alarms and cut-outs for low fluid level and over-temperature.

The 22210-4 will accept up to four 22410-0 and up to six 22400-0 Seta Vapour Pressure Cylinder / Ullage Chamber assemblies.

Supplied with:
4 pressure cylinder mounting brackets
Mains lead
Instruction manual

Test Temperature Rangeambient +5 °C to 90 °C (9 °F below ambient to 194 °F)
Temperature Uniformity± 0.1 °C @ 37.8 °C
Bath Volume80 litre
Bath FluidWater (De-ionised)
Cylinder CapacityUp to 6 cylinder assemblies
Voltage220/240 V, 50/60 Hz
Power2.2 kW
Size (HxWxD)77 x 55 x 51 cm
Weight70 kg
CCCN CodeTariff 84198998

Methods

ASTM D323 Procedures A & C & D
ASTM D1267
ASTM D4953 Procedure A
IP 69 Procedures A & C & D
IP 410
BS EN ISO 4256 & BS 2000-410
BS ISO 3007 & BS 2000-69
ASTM D1267 Standard test method for gauge vapour pressure of liquefied petroleum (LP) gases (LP - gas method)
IP 410 Liquefied petroleum gases - Determination of gauge vapour pressure - LPG method (ISO 4256:1996)
ASTM D4953 Procedure A Standard Test Method for Vapor Pressure of Gasoline and Gasoline-Oxygenate Blends (Dry Method)
BS ISO 3007 & BS 2000-69 Vapour Pressure of Petroleum Products (Reid Method)
BS EN ISO 4256 & BS 2000-410 Determination of gauge vapour pressure. LPG method
ASTM D323 Procedures A & C & D Standard test method for vapor pressure of petroleum products (Reid Method)
IP 69 Procedures A & C & D Petroleum products - Determination of vapour pressure - Reid method