Seta Existent Gum Solid Block Bath – Air - 12210-0
A Solid Block Bath designed to carry out up to five simultaneous tests for determining existent gum content in fuels by the Jet Evaporation method.
The bath has removable taper-fit conical air jet adaptors with copper screens, and an air flow control valve and gauge. Along with five test wells and a thermometer well. Outlets can be individually checked for uniform flow of air.
Seta Existent Gum Solid Block Bath – Air - 12210-0
Features
- Cost effective and simplified testing using air operation
- Digital temperature control
- Over-temperature cut-out
Additional Information
The bath has a temperature range of 140 ° to 260 °C, and is controlled by a digital temperature controller which displays both the set temperature and the actual bath temperature measured by a probe. The flow of air is adjusted by an inlet control valve and monitored on a Bourdon gauge calibrated for air.
Supplied with;
Bourdon gauge type flow indicator (calibrated for air)
5 x air jet assemblies
5 x borosilicate glass beakers
Instruction manual
NOTE: Rotary Compressor is required for operation. Stanhope-Seta provide this as the Rotary Compressor (12314-0).
Operating Temp. Range | 140 to 260 °C ±0.5 °C |
---|---|
Heaters | 2 kW |
Over-temperature Cut-out | 280 °C (adjustable) |
Air/Steam Inlet | 15 mm o.d pipe |
Flow Indicator | Calibrated for minimum and maximum air flow |
Power | 2 kW |
Voltage | 220/240 V, 50/60 Hz or 220/240 V, 60 Hz |
Size (HxWxD) | 45 x 35 x 50 cm |
Weight | 40 kg |
CCCN Code | Tariff 90318080 |
Industries
Methods
ISO 6246 | Existent Gum in Fuels by Jet Evaporation |
---|---|
DIN 51 784 | Existent Gum in Fuels by Jet Evaporation |
BS EN ISO 6246 | Petroleum products. Gum content of fuels. Jet evaporation method |
IP 540 | Determination of the existent gum content of aviation turbine fuel - Jet evaporation method |
ASTM D381 | Standard test method for gum content in fuels by jet evaporation |
IP 131 | Standard test method for gum content in fuels by jet evaporation |