MTVM – Kerosine 500 ml - 99850-0

Methods
ASTM D86
ASTM D445-IP 71
ASTM D1319
ASTM D1322
ASTM D2386-IP 16
ASTM D3227-IP 342
ASTM D3242-IP 354
ASTM D4052
ASTM D7153
ASTM D7154
IP 57
IP 123
IP 156
IP 170
IP 365
EN 13736
ISO 3012
ISO 3014
ISO 3104
ISO 3405
ISO 3837
ISO 12185

Produced in general accordance with the principles of ISO 17034 and ISO Guide 35, the Multi Test Verification Material (MTVM) Kerosine provides certified values for multiple test methods and has been characterised using a network of competent laboratories to provide international traceability. It is a highly cost effective solution to help meet verification requirements for audited laboratories and those which comply with ISO 17025.

Multi Test Verification Materials (MTVMs) allow routine monitoring of instrument performance and are also particularly helpful in training personnel on new equipment and test methods. The purchase of MTVMs is recommended with new instrumentation to assist with installation and commissioning.

Incorrect determination of a result can have far reaching financial and safety implications. The growing use of automated instrumentation increases the possibility that incorrect results may go undetected and in addition the early indication of bias is a useful warning to minimise production ‘giveaway’.

Seta MTVMs are unique because, unlike most other certified reference material that are only suitable for validating a specific parameter/value, Seta MTVMs enable a user to validate different tests and instrumentation using the same sample material.

Certification: the Multi Test Verification Material (MTVM) Kerosine is supplied with a certificate of measurement which gives the certified value for each test method covered by the material.

Suitable for use with a number of Seta instruments including the Setastill Distillation (11860-3) and the Auto-Abel Flash Point Tester (34200-2).

MTVM – Kerosine 500 ml - 99850-0

Features

  • Cost effective solution to verification requirements
  • Cross-check instrument performance
  • Assistance for operator training
  • Supports full compliance to ASTM, IP, CEN and ISO test methods
  • Supplied with full documentation including SDS
  • Tamper evident security packaging
  • 2 year shelf life from manufacture

Additional Information

Distillation IBPRange: 140 to 180 °C Amount/test: 100 mL
Distillation 10%Range: 159 to 188 °C Amount/test: 100 mL
Distillation 50%Range: 183 to 218 °C Amount/test: 100 ml
Distillation 90%Range: 220 to 252 °C Amount/test: 100 mL
Distillation FBPRange: 241 to 269 °C Amount/test: 100 mL
Distillation ResidueRange: 1.1 to 1.3% vol Amount/test: 100 mL
Distillation LossRange: 0.4 to 0.8% vol Amount/test: 100 mL
Flash PointRange: 35 to 60 °C Amount/test: 85 mL
Freezing PointRange: -62 to -43 °C Amount/test: 25 mL
Aromatics FIARange: 16 to 22% vol Amount/test: 0.75 mL
Smoke PointRange: 20 to 25 mm Amount/test: 20 mL
Kin Vis -20°CRange: 2 to 8 mm2/s Amount/test: 20 mL
Acid NumberRange: <0.100 mg KOH/g Amount/test: 100 mL
MercaptansRange: 0.0003 to 0.0100 %(m/m) Amount/test: 40 mL
CCCN CodeTariff 38229000

Methods

ASTM D86
ASTM D445-IP 71
ASTM D1319
ASTM D1322
ASTM D2386-IP 16
ASTM D3227-IP 342
ASTM D3242-IP 354
ASTM D4052
ASTM D7153
ASTM D7154
IP 57
IP 123
IP 156
IP 170
IP 365
EN 13736
ISO 3012
ISO 3014
ISO 3104
ISO 3405
ISO 3837
ISO 12185
ASTM D1319 Standard test method for hydrocarbon types in liquid petroleum products by fluorescent indicator absorption
ASTM D1322 Standard test method for smoke point of kerosine and aviation turbine fuel
IP 57 Petroleum products - Determination of the smoke point of kerosine
ISO 3014 Petroleum products - Determination of the smoke point of kerosine
ASTM D445-IP 71 Standard test method for kinematic viscosity of transparent and opaque liquids (the calculation of dynamic viscosity)
ISO 3104 Kinematic Viscosity of Transparent and Opaque Liquids and the Calculation of Dynamic Viscosity
ASTM D86 Standard test method for distillation of petroleum products at atmospheric pressure
IP 123 Petroleum products - Determination of distillation characteristics at atmospheric pressure (ISO 3405:2000)
ISO 3405 Distillation of Petroleum Products
IP 170 Petroleum products and other liquids - Determination of flash point - Abel closed cup method (ISO 13736:1997)
ASTM D2386-IP 16 Providing rapid and accurate freezing point of aviation fuels within the range +5 to -65°C
EN 13736 Safety of machine tools. Pneumatic presses
ISO 3837 Fluorescent indicator adsorption method
ASTM D3242-IP 354 Standard Test Method for Acidity in Aviation Turbine Fuel
ASTM D3227-IP 342 Standard Test Method for (Thiol Mercaptan) Sulfur in Gasoline, Kerosine, Aviation Turbine, and Distillate Fuels (Potentiometric Method)
ISO 3012 Determination of thiol (mercaptan) sulfur in light and middle distillate fuels - Potentiometric method
ASTM D4052 Method for Density, Relative Density, and API Gravity of Liquids by Digital Density Meter
IP 365 Density and Relative Density of Liquids by Digital Density Meter
ISO 12185 Crude petroleum and petroleum products -- Determination of density -- Oscillating U-tube method
IP 156 Determination of hydrocarbon types in petroleum products - fluorescent indicator adsorption method
ASTM D7153 Standard Test Method for Freezing Point of Aviation Fuels (Automatic Laser Method)
ASTM D7154 Standard Test Method for Freezing Point of Aviation Fuels (Automatic Fiber Optical Method)