Flow Verification Kit - 97450-0

Methods
ASTM D189
ASTM D4530
IP 13
IP 398
BS EN ISO 10370 & BS 2000-398
ISO 6615
ISO 10370

The Flow Verification Kit is used with the Micro Carbon Residue Tester (MCRT) (97400-3), to enable the user to verify the flow rate of nitrogen during the test stages.

The kit consists of a 150 mm glass scale VA flowmeter on a stand, supplied with a length of plastic tube that when connected to the MCRT in place of the existing mass flow meter will show the actual nitrogen flow rate during the test cycle.

The Flow Verification Kit should only to be used by a Seta trained partner.

The VA flowmeter is supplied with a two point UKAS certificated of calibration for the two specific gas flow rates 160 ml/min and 600 ml/min.

Additional Information

CCCN CodeTariff 90269000

Methods

ASTM D189
ASTM D4530
IP 13
IP 398
BS EN ISO 10370 & BS 2000-398
ISO 6615
ISO 10370
ASTM D189 Standard test method for conradson carbon residue of petroleum products
ISO 6615 Petroleum products - Determination of carbon residue - Conradson method
ASTM D4530 Standard test method for determination of carbon residue (micro method)
BS EN ISO 10370 & BS 2000-398 Petroleum products - Determination of carbon residue - Micro method
ISO 10370 Carbon Residue of Petroleum Products
IP 398 Determination of carbon residue - micro method
IP 13 Petroleum products - Determination of carbon residue - Conradson method

Flow Verification Kit - 97450-0