TELEPHONE: +44 (0)1932 564391
SALES@STANHOPE-SETA.CO.UK

Seta Reid Vapour Pressure Bath

Part Number 22210-4

The Seta Reid Vapour Pressure Bath is a floor standing water bath specifically designed for the determination of vapour pressure with Seta Reid or Seta Vapour pressure cylinders.

Calibration and verification equipment availableCalibration and verification equipment available

ADDITIONAL INFORMATION

The stainless steel 80 litre water bath has a temperature range of ambient +5C to 90C and can achieve a test temperature of 37.8C (100F) with a uniformity of 0.1C (0.2F).

A programmable, digitally controlled thermostir unit combines the functions of heater, temperature controller, timer and stirrer. The thermostir unit is equipped with an RS 232 port, a switched output for an external relay, a socket for an external PT100 temperature probe and alarms and cut-outs for low fluid level and over-temperature.

The 22210-4 will accept up to four 22410-0 and up to six 22400-0 Seta Vapour Pressure Cylinder / Ullage Chamber assemblies.

Supplied with: 4 pressure cylinder mounting brackets, mains lead and instruction manual.

SPECIFICATIONS

Test Temperature Range ambient +5C to 90C (9F below ambient to 194F)
Temperature Uniformity 0.1C @ 37.8C
Bath Volume 80 litre
Bath Fluid Water (De-ionised)
Cylinder Capacity Up to 6 cylinder assemblies
Voltage 220/240V, 50/60Hz
Power 2.2kW
Size (HxWxD) 77 x 55 x 51cm
Weight 70kg
CCCN Code: Tariff 90278099
FLASHPOINT VAPOUR PRESSURE DISTILLATION VISCOSITY BIOFUELS KEYWORD SEARCH CATEGORY SEARCH METHOD SEARCH FUEL SPEC SEARCH

Click here request Stanhope-Setas new Catalogue now


Seta Reid Vapour Pressure Bath

FEATURES

Accepts up to 6 pressure cylinder assemblies
Temperature range ambient +5C to 90C (194F) 0.1C
Uniformity better than 0.1C @ 37.8C ( 0.2F @ 100F)
Digital temperature control
Low fluid level and over-temperature protection

METHODS

ASTM D1267, ASTM D323 Procedures A, C & D, ASTM D4953 Procedure A, BIS IS 1448 Part 39, BS 2000 Parts 69, 402 (obs) & 410, EN 12 (obs), FTM 791 1201, IP 402 (obs), IP 410, IP 69 Procedures A, C & D, ISO 3007, ISO 4256, JIS K2258, NF 12 (obs), NF M07-007, NF M41-010

DETAILS OF METHODS

NF 12 (obs)Vapour pressure
ASTM D323 Procedures A, C & DStandard test method for vapor pressure of petroleum products (Reid Method)
IP 69 Procedures A, C & DPetroleum products - Determination of vapour pressure - Reid method
BIS IS 1448 Part 39Vapour Pressure by Reid Method
ASTM D4953 Procedure AStandard Test Method for Vapor Pressure of Gasoline and Gasoline-Oxygenate Blends (Dry Method)
IP 402 (obs)Vapour Pressure of Petroleum Products (Reid Method)
ISO 3007Vapour Pressure of Petroleum Products (Reid Method)
EN 12 (obs)Vapour Pressure of Petroleum Products (Reid Method)
FTM 791 1201Vapour Pressure of Petroleum Products (Reid Method)
JIS K2258Vapour Pressure
BS 2000 Parts 69, 402 (obs) & 410Petroleum products - Determination of vapour pressure - Reid method
ASTM D1267Standard test method for gauge vapour pressure of liquefied petroleum (LP) gases (LP - gas method)
IP 410Liquefied petroleum gases - Determination of gauge vapour pressure - LPG method (ISO 4256:1996)
ISO 4256Vapour Pressure of Liquefied Petroleum Gases
NF M07-007Vapour Pressure of Petroleum Products (Reid Method)
NF M41-010Vapour Pressure of Liquefied Petroleum Gases