Setaflash Series 8 Flash Point Tester HighTemp – Gas Ignitor - 82050-0

Methods
ASTM D3278
ASTM D3828
ASTM D7236
ASTM D8174
ASTM E502
IP 523
IP 534
IP 602
CLP Regulations EC No 1272/2008
EPA 1020 A & B
ISO 3679
ISO 3680 (Obs)
ISO 9038

The Setaflash Series 8 is an automated closed cup flash point tester which operates with gas ignition across the temperature range +5 to 300 °C.

There are two modes of operation:
– Flash / No Flash
– Ramp

The ramp mode increases the sample temperature at a rate of 2 °C/min and automatically dips the ignitor every 1 °C up to 100 °C (every 2 °C above 100 °C), until either a flash is detected or the end of test temperature is reached.

Setaflash Series 8 Flash Point Tester HighTemp – Gas Ignitor - 82050-0

Features

  • Ambient +5 to 300 °C
  • Small sample size, 2 or 4 ml
  • Flash/No Flash & Ramp modes
  • Gas Ignitor
  • Automatic dipping and flash detection
  • Forced Air Cooling
  • 64 Test memory & RS232 interface
  • °C or °F temperature display

Additional Information

The automatic flash point detection system is tuned to ignore halo and other false flash effects, enhancing precision and accuracy. Barometric pressure is measured by an internal barometer, and the correction is automatically applied to the test result.

Peltier cell technology is used for heating and cooling, ensuring precise temperature control and rapid cooldown after a test is completed. The bright colour LCD display shows test parameters and the flash point test result. The text and colour of the top line indicates instrument status. All functions are accessed via menus, navigated by the keypad. Up to 64 test results can be stored in memory, each tagged with a sample reference and operator name. Results can be downloaded to a PC or printer via the RS232C port. The firmware is upgradeable for future developments.

SUPPLIED WITH: Ignitor, 2 ml syringe, mains lead and instruction manual.

Temperature RangeAmbient +5 to 300 °C
Sample Size2 or 4 ml according to method
IgnitorGas
Test duration, Rapid Equilibrium Mode1 minute below 100 °C, 2 minutes above 100 °C, FAME 1 minute or user defined 1 to 99 minutes
Test duration, Ramp ModeTypically 7 minutes
Heating / Cooling MethodCeramic Pad, Forced Air (post-test cooldown)
Sample Cup MaterialAluminium
Voltage100 to 250 V, 50/60 Hz
Power300 W
Size (HxWxD)30 x 34 x 38 cm
Weight8 kg
CCCN CodeTariff 90268020

Methods

ASTM D3278
ASTM D3828
ASTM D7236
ASTM D8174
ASTM E502
IP 523
IP 534
IP 602
CLP Regulations EC No 1272/2008
EPA 1020 A & B
ISO 3679
ISO 3680 (Obs)
ISO 9038
ASTM D3278 Standard Test Methods for Flash Point of Liquids by Small Scale Closed-Cup Apparatus - paints, enamels, lacquers, varnishes, and related products
ISO 3680 (Obs) Methods of test for paints. Tests on liquid paints (excluding chemical tests). Test for flash/no flash (rapid equilibrium method)
ASTM E502 Standard Test Method for Selection and Use of ASTM Standards for the Determination of Flash Point of Chemicals by Closed Cup Methods
ISO 3679 Determination of flash point. Rapid equilibrium closed cup method
EPA 1020 A & B Setaflash Closed-Cup Method for determining ignitability
ASTM D3828 Standard Test Methods for Flash Point by Small Scale Closed Tester
IP 523 Determination of flash point. Rapid equilibrium closed cup method
ASTM D7236 Flash Point by Small Scale Closed Cup Ramp Method
IP 534 Flash Point by Small Scale Closed Cup Ramp Method
ISO 9038 Determination of sustained combustibility of liquids
IP 602 Determination of sustained combustibility of liquids
CLP Regulations EC No 1272/2008 European Regulation (EC) No 1272/2008 on classification, labelling and packaging of substances and mixtures
ASTM D8174 Standard Test Method for Finite Flash Point Determination of Liquid Wastes by Small-Scale Closed Cup Tester