MTVM – Gas Oil 500 ml - 99851-0

Methods
ASTM D86
ASTM D93
ASTM D97-IP15
ASTM D445-IP 71
ASTM D1298
ASTM D1744
ASTM D2500-IP 219
ASTM D4052
ASTM D5771
ASTM D5772-IP 445
ASTM D5773
ASTM D5893
ASTM D5949
ASTM D5950
ASTM D6079
ASTM D6371
ASTM D6749
ASTM D6892
IP 34
IP 123
IP 160
IP 219
IP 309
IP 365
IP 438
IP 444
IP 446
IP 450
EN 166
EN 23015
ISO 2719
ISO 3015
ISO 3016
ISO 3104
ISO 3405
ISO 3675
ISO 12156-1
ISO 12937

A unique secondary reference material that provides traceable validation of different test parameters from one sample. Rapid global delivery and compliance with ISO 17025 and ISO 9001 requirements, means that Stanhope-Seta’s verification materials offer readily available support for laboratory accreditation and compliance programmes.
Note: Each MTVM sample provides a single value for all parameters, shown below with nominal values stated.

Incorrect determination of a result can have far reaching financial and safety implications. The growing use of automated instrumentation increases the possibility that incorrect results may go undetected and in addition the early indication of bias is a useful warning to minimise production ‘giveaway’.

Certification: Supplied with a Certificate which gives the certified value for each test method covered by the material.

MTVM – Gas Oil 500 ml - 99851-0

Features

  • Unique multi-test verification from a single sample
  • Manufactured in conformance to ISO 9001 and ISO 17025
  • Supports full compliance to ASTM and IP test method
  • Supplied with full certification including MSDS
  • Supplied in 500 ml containers
  • Tamper evident security packaging
  • 2 year shelf life from manufacture

Additional Information

Distillation at 15 °CRange: 0.83 to 0.854 kg/l Amount/test: 200 ml
Distillation IBPRange: 160 to 190 °C Amount/test: 100 ml
Distillation 50%Range: 260 to 290 °C Amount/test: 100 ml

95% - Range 335 to 368°C

Amount/test 100ml

Distillation 90%Range: 320 to 350 °C Amount/test: 100 ml
Distillation FBPRange: 350 to 385 °C Amount/test: 100 ml
Distillation ResidueRange: 1.25 to 1.42 %vol Amount/test: 100 ml
Distillation LossRange: 0.26 to 0.55 %vol Amount/test: 100 ml
Flash PointRange: 56 to 80 °C Amount/test: 75 ml
Cloud PointRange: -17 to -4 °C Amount/test: 38 ml
CFPPRange: -30 to 0 °C Amount/test: 45 ml
Pour PointRange: -33 to -6 °C Amount/test: 38 ml
Kin Visc 40 °CRange: 2.3 to 3.5 mm2/s Amount/test: 40 ml
Lubricity HFRRRange: 271 to 512 µm Amount/test: 2 ml
Water Karl FischerRange: 23.4 to 63.9 mg/kg Amount/test: 5 ml
CCCN CodeTariff 27101215

Methods

ASTM D86
ASTM D93
ASTM D97-IP15
ASTM D445-IP 71
ASTM D1298
ASTM D1744
ASTM D2500-IP 219
ASTM D4052
ASTM D5771
ASTM D5772-IP 445
ASTM D5773
ASTM D5893
ASTM D5949
ASTM D5950
ASTM D6079
ASTM D6371
ASTM D6749
ASTM D6892
IP 34
IP 123
IP 160
IP 219
IP 309
IP 365
IP 438
IP 444
IP 446
IP 450
EN 166
EN 23015
ISO 2719
ISO 3015
ISO 3016
ISO 3104
ISO 3405
ISO 3675
ISO 12156-1
ISO 12937
ASTM D445-IP 71 Standard test method for kinematic viscosity of transparent and opaque liquids (the calculation of dynamic viscosity)
ISO 3104 Kinematic Viscosity of Transparent and Opaque Liquids and the Calculation of Dynamic Viscosity
ASTM D86 Standard test method for distillation of petroleum products at atmospheric pressure
IP 123 Petroleum products - Determination of distillation characteristics at atmospheric pressure (ISO 3405:2000)
ISO 3405 Distillation of Petroleum Products
ISO 2719 Flash Point by Pensky-Martens Closed Tester
ASTM D97-IP15 Standard Test Method for Pour Point of Petroleum Products
ASTM D2500-IP 219 Standard test method for cloud point of petroleum products
EN 23015 Cloud Point of Petroleum Oils
ISO 3015 Cloud Point of Petroleum Oils
ISO 3016 Pour Point of Petroleum Oils
IP 309 Diesel and domestic heating fuels - Determination of cold filter plugging point
ASTM D93 Standard test methods for flash-point by Pensky-Martens closed cup tester
IP 34 Determination of flash point - Pensky - Martens closed cup method (ISO 2719:2002)
ASTM D6371 Standard test method for cold filter plugging point of diesel and heating fuels
ASTM D5772-IP 445 Standard test method for cloud point of petroleum products (linear cooling rate method)
IP 160 Laboratory determination of denisty - Hydrometer method
ASTM D1298 Standard test method for Density, Relative Density, or API Gravity of Crude Petroleum and Liquid Petroleum by Hydrometer method
ISO 3675 Crude petroleum and liquid petroleum products - Laboratory determination of density - Hydrometer method Crude petroleum and liquid petroleum products -- Laboratory determination of density -- Hydrometer method Crude petroleum and liquid petroleum products -- Laboratory determination of density -- Hydrometer method Crude petroleum and liquid petroleum products -Laboratory determination of density - Hydrometer method
ASTM D6079 Standard Test Method for Evaluating Lubricity of Diesel Fuels by the High-Frequency Reciprocating Rig (HFRR)
IP 450 Diesel fuel - Assessment of lubricity using the high-frequency reciprocating rig (HFRR) - Part I: Test Method
ISO 12156-1 Diesel fuel - Assessment of lubricity using the high-frequency reciprocating rig (HFRR) - Part 1: Test method
IP 438 Petroleum products - Determination of water - Coulometric Karl Fischer titration method
ASTM D1744 Standard test Method for Determination of Water in Liquid Petroleum Products by Karl Fischer Reagent (Withdrawn 2000)
ISO 12937 Petroleum products - Determination of water - Coulometric Karl Fischer titration method
ASTM D5771 Standard Test Method for Cloud Point of Petroleum Products (Optical Detection Stepped Cooling Method)
IP 444 Determination of the cloud point of petroleum products - Automatic stepped cooling rate method
ASTM D5773 Standard Test Method for Cloud Point of Petroleum Products (Constant Cooling Rate Method)
IP 446 Determination of the cloud point of petroleum products - Automatic constant cooling rate method
IP 219 Determination of cloud point
EN 166 Standard is applicable to all types of personal eye protectors used against various dangers
ASTM D5893 Standard Specification for Cold Applied, Single Component, Chemically Curing Silicone Joint Sealant for Portland Cement Concrete Pavements
ASTM D5950 Standard Test Method for Pour Point of Petroleum Products (Automatic Tilt Method)
ASTM D5949 Standard Test Method for Pour Point of Petroleum Products (Automatic Pressure Pulsing Method)
ASTM D6749 Standard Test Method for Pour Point of Petroleum Products (Automatic Air Pressure Method)
ASTM D6892 Standard Test Method for Pour Point of Petroleum Products
ASTM D4052 Method for Density, Relative Density, and API Gravity of Liquids by Digital Density Meter
IP 365 Density and Relative Density of Liquids by Digital Density Meter