Seta Cu-Ag Corrosion Bath - 11300-2

Methods
ASTM D130
ASTM D4048
ASTM D4814
ASTM D7667
ASTM D7671
IP 112
IP 154
IP 611
BS 2000-112 & IP 112
BS EN ISO 2160 & BS 2000-154 & ISO 2160
BS EN ISO 6251 & BS 2000-411 & ISO 6251
DIN EN ISO 2160

The Seta Copper / Silver Corrosion Bath is a stainless steel water or oil bath, which is digitally controlled to ±0.1 °C over a temperature range of ambient +5 °C to 120 °C.

Seta Cu-Ag Corrosion Bath - 11300-2

Features

  • Copper/Silver corrosion tests
  • Two test stations
  • Small footprint

Additional Information

The bath has two test stations, each with a lid and hook for suspending either a Corrosion Pressure Vessel (11500-0) or a test tube Support Assembly (11420-0). The test tube support can hold up to three Test Tubes (11590-0). Any combination of corrosion vessels and test tube supports may be used.

The top mounted thermostir unit incorporates a low fluid level protection device.

Supplied with;
Two lids
Mains lead
Instruction manual

Temperature rangeAmbient +5 °C to 120 °C
Temperature stability±0.1 °C
Bath fluidWater or oil
Bath capacity18 Litres
Heater power1200 W
Water Inlet Nozzle10 mm
Overflow drain10 mm
Voltage110/120 V, 50/60 Hz or 220/240 V, 50/60 Hz
Size (HxWxD)52 x 34 x 23 cm
Weight9 kg
CCCN CodeTariff 84198998

Methods

ASTM D130
ASTM D4048
ASTM D4814
ASTM D7667
ASTM D7671
IP 112
IP 154
IP 611
BS 2000-112 & IP 112
BS EN ISO 2160 & BS 2000-154 & ISO 2160
BS EN ISO 6251 & BS 2000-411 & ISO 6251
DIN EN ISO 2160
ASTM D4814 General Specification for Automotive Spark Ignition Engine Fuels
BS EN ISO 2160 & BS 2000-154 & ISO 2160 Copper Corrosion from Petroleum Products by the Copper Strip Tarnish Test
ASTM D4048 Standard test method for detection of copper corrosion from lubricating grease
BS EN ISO 6251 & BS 2000-411 & ISO 6251 Liquid petroleum gases. Corrosiveness to copper. Copper strip test
BS 2000-112 & IP 112 Determination of corrosiveness to copper of lubricating grease. Copper strip method
IP 112 Determination of corrosiveness to copper of lubricating grease - Copper strip method
IP 154 Corrosiveness to Copper - Copper Strip Test
ASTM D130 Standard Test for Corrosiveness to Copper from Petroleum Products by Copper Strip Test
ASTM D7671 Corrosiveness to Silver by Automotive Spark–Ignition Engine Fuel–Silver Strip Method
IP 611 Corrosiveness to silver of automotive gasoline - Silver strip method
ASTM D7667 Corrosiveness to Silver by Automotive Spark-Ignition Engine Fuel—Thin Silver Strip Method
DIN EN ISO 2160 Petroleum products. Corrosiveness to copper. Copper strip test