MTVM – Gas Oil 500 ml - 99851-0
Methods
ASTM D86
ASTM D93
ASTM D97-IP15
ASTM D445-IP 71
ASTM D1744
ASTM D2500-IP 219
ASTM D4052
ASTM D5771
ASTM D5772-IP 445
ASTM D5773
ASTM D5893
ASTM D5949
ASTM D5950
ASTM D6079
ASTM D6371
ASTM D6749
ASTM D6892
IP 34
IP 123
IP 219
IP 309
IP 365
IP 438
IP 444
IP 446
IP 450
EN 166
EN 23015
ISO 2719
ISO 3015
ISO 3016
ISO 3104
ISO 3405
ISO 12156-1
ISO 12185
ISO 12937
A unique secondary reference material that provides traceable validation of different test parameters from one sample. Rapid global delivery and compliance with ISO 17025 and ISO 9001 requirements, means that Stanhope-Seta’s verification materials offer readily available support for laboratory accreditation and compliance programmes.
Note: Each MTVM sample provides a single value for all parameters, shown below with nominal values stated.
Incorrect determination of a result can have far reaching financial and safety implications. The growing use of automated instrumentation increases the possibility that incorrect results may go undetected and in addition the early indication of bias is a useful warning to minimise production ‘giveaway’.
Certification: Supplied with a Certificate which gives the certified value for each test method covered by the material.
MTVM – Gas Oil 500 ml - 99851-0
Features
- Unique multi-test verification from a single sample
- Manufactured in conformance to ISO 9001 and ISO 17025
- Supports full compliance to ASTM and IP test method
- Supplied with full certification including MSDS
- Supplied in 500 ml containers
- Tamper evident security packaging
- 2 year shelf life from manufacture
Additional Information
| Distillation at 15 °C | Range: 0.83 to 0.854 kg/l Amount/test: 200 ml |
|---|---|
| Distillation IBP | Range: 160 to 190 °C Amount/test: 100 ml |
| Distillation 50% | Range: 260 to 290 °C
Amount/test: 100 ml
95% - Range 335 to 368°C Amount/test 100ml |
| Distillation 90% | Range: 320 to 350 °C Amount/test: 100 ml |
| Distillation FBP | Range: 350 to 385 °C Amount/test: 100 ml |
| Distillation Residue | Range: 1.25 to 1.42 %vol Amount/test: 100 ml |
| Distillation Loss | Range: 0.26 to 0.55 %vol Amount/test: 100 ml |
| Flash Point | Range: 56 to 80 °C Amount/test: 75 ml |
| Cloud Point | Range: -17 to -4 °C Amount/test: 38 ml |
| CFPP | Range: -30 to 0 °C Amount/test: 45 ml |
| Pour Point | Range: -33 to -6 °C Amount/test: 38 ml |
| Kin Visc 40 °C | Range: 2.3 to 3.5 mm2/s Amount/test: 40 ml |
| Lubricity HFRR | Range: 271 to 512 µm Amount/test: 2 ml |
| Water Karl Fischer | Range: 23.4 to 63.9 mg/kg Amount/test: 5 ml |
| CCCN Code | Tariff 27101215 |
Methods
ASTM D86
ASTM D93
ASTM D97-IP15
ASTM D445-IP 71
ASTM D1744
ASTM D2500-IP 219
ASTM D4052
ASTM D5771
ASTM D5772-IP 445
ASTM D5773
ASTM D5893
ASTM D5949
ASTM D5950
ASTM D6079
ASTM D6371
ASTM D6749
ASTM D6892
IP 34
IP 123
IP 219
IP 309
IP 365
IP 438
IP 444
IP 446
IP 450
EN 166
EN 23015
ISO 2719
ISO 3015
ISO 3016
ISO 3104
ISO 3405
ISO 12156-1
ISO 12185
ISO 12937
| ASTM D445-IP 71 | Standard test method for kinematic viscosity of transparent and opaque liquids (the calculation of dynamic viscosity) |
|---|---|
| ISO 3104 | Kinematic Viscosity of Transparent and Opaque Liquids and the Calculation of Dynamic Viscosity |
| ASTM D86 | Standard test method for distillation of petroleum products at atmospheric pressure |
| IP 123 | Petroleum products - Determination of distillation characteristics at atmospheric pressure (ISO 3405:2000) |
| ISO 3405 | Distillation of Petroleum Products |
| ISO 2719 | Flash Point by Pensky-Martens Closed Tester |
| ASTM D97-IP15 | Standard Test Method for Pour Point of Petroleum Products |
| ASTM D2500-IP 219 | Standard test method for cloud point of petroleum products |
| EN 23015 | Cloud Point of Petroleum Oils |
| ISO 3015 | Cloud Point of Petroleum Oils |
| ISO 3016 | Pour Point of Petroleum Oils |
| IP 309 | Diesel and domestic heating fuels - Determination of cold filter plugging point |
| ASTM D93 | Standard test methods for flash-point by Pensky-Martens closed cup tester |
| IP 34 | Determination of flash point - Pensky - Martens closed cup method (ISO 2719:2002) |
| ASTM D6371 | Standard test method for cold filter plugging point of diesel and heating fuels |
| ASTM D5772-IP 445 | Standard test method for cloud point of petroleum products (linear cooling rate method) |
| ASTM D6079 | Standard Test Method for Evaluating Lubricity of Diesel Fuels by the High-Frequency Reciprocating Rig (HFRR) |
| IP 450 | Diesel fuel - Assessment of lubricity using the high-frequency reciprocating rig (HFRR) - Part I: Test Method |
| ISO 12156-1 | Diesel fuel - Assessment of lubricity using the high-frequency reciprocating rig (HFRR) - Part 1: Test method |
| IP 438 | Petroleum products - Determination of water - Coulometric Karl Fischer titration method |
| ASTM D1744 | Standard test Method for Determination of Water in Liquid Petroleum Products by Karl Fischer Reagent (Withdrawn 2000) |
| ISO 12937 | Petroleum products - Determination of water - Coulometric Karl Fischer titration method |
| ASTM D5771 | Standard Test Method for Cloud Point of Petroleum Products (Optical Detection Stepped Cooling Method) |
| IP 444 | Determination of the cloud point of petroleum products - Automatic stepped cooling rate method |
| ASTM D5773 | Standard Test Method for Cloud Point of Petroleum Products (Constant Cooling Rate Method) |
| IP 446 | Determination of the cloud point of petroleum products - Automatic constant cooling rate method |
| IP 219 | Determination of cloud point |
| EN 166 | Standard is applicable to all types of personal eye protectors used against various dangers |
| ASTM D5893 | Standard Specification for Cold Applied, Single Component, Chemically Curing Silicone Joint Sealant for Portland Cement Concrete Pavements |
| ASTM D5950 | Standard Test Method for Pour Point of Petroleum Products (Automatic Tilt Method) |
| ASTM D5949 | Standard Test Method for Pour Point of Petroleum Products (Automatic Pressure Pulsing Method) |
| ASTM D6749 | Standard Test Method for Pour Point of Petroleum Products (Automatic Air Pressure Method) |
| ASTM D6892 | Standard Test Method for Pour Point of Petroleum Products |
| ASTM D4052 | Method for Density, Relative Density, and API Gravity of Liquids by Digital Density Meter |
| IP 365 | Density and Relative Density of Liquids by Digital Density Meter |
| ISO 12185 | Crude petroleum and petroleum products -- Determination of density -- Oscillating U-tube method |