Seta Autowash - 14024-2

Methods
ASTM D892
ASTM D6082
IP 146

The Autowash is a bench top unit which automatically cleans and dries Mott and Norton diffusers using one or two solvents without removing the air tube. The automatic wash programmes provides you with a consist clean that has significant benefits providing reliable and repeatable foam test results. The Autowash is suitable for use with air inlet tubes of differing lengths and diameters.

Seta Autowash - 14024-2

Features

  • Automatic, unattended cleaning of diffuser and air tube
  • Cleans and dries cylindrical metal diffusers or spherical diffuser stones
  • 10 cleaning programmes
  • Single or two solvent wash
  • Uni-directional flow

Additional Information

Ease of use:

During cleaning an enclosed system is used to draw solvent and air through the diffuser in one direction which avoids particles or used solvent entering the diffuser and blocking the pores.

You can select a total of 10 programmes from the controller allowing you the choice of a single or two solvent wash with cycle times ranging from 3 to 19 minutes. Typically 120 ml of solvent is required.
Once you start a programme you can leave the Autowash unattended and the instrument sounds an audible warning when the cycle has finished.

Supplied with:
Tubing
Alternative diameter tube connectors
Vacuum pump
Solvent containers
Mains lead
Instruction manual
Voltage/power115 V and 230 V, 50/60 Hz
Autowash dimensions895 x 235 x 305 mm
Diaphragm pump dimensions244 x 144 x 198 (127) mm
Autowash weight16 kg

Methods

ASTM D892
ASTM D6082
IP 146
ASTM D6082 Standard test method for high temperature foaming characteristics of lubricating oils
IP 146 Determination of foaming characteristics of lubricating oils
ASTM D892 Test method for foaming characteristics of lubricating oils