+44 (0)1932 564391

sales@stanhope-seta.co.uk
Find your local representative

Seta Hightemp Bath - 12 way

Part Number 16620-3

The Seta HighTemp Bath, 12 way, is a solid block bath for oxidation and thermal stability tests that allows up to 12 tests to be carried out simultaneously.

ADDITIONAL INFORMATION

Comprises a solid block bath and a precision digital temperature control system. The aluminium solid block bath maintains a set temperature to within 0.5C across a range of 50 to 400C. The top of the bath is insulated by a ceramic pad, and the vacant test wells have removable ceramic covers. The bath can accept twelve 27mm oxidation cells.

The in-built precision digital temperature controller is simple to operate and features an easy-to-read high visibility display.

A range of flow control units are available and should be selected from the required accessories according to the required test method. Flow control panels comprise of a gas inlet pressure regulator and 12 flowmeters. Panels are convieniently mounted on the rear of the bath saving laboratory bench space. Tubing connections are also kept to a minimum ensuring a safe and neat installation. Optional brackets allow the panels to be bench mounted if this is preferred.

Supplied with: Built-in precision digital temperature controller, mains leads and instruction manual.

Note: Flowmeters, glassware and catalysts must be ordered separately.

SPECIFICATIONS

Temperature range 50 to 400C
Temperature Stability +/- 0.5C
Test Wells 12 x 27 mm diameter
Voltage 220/240 V 50/60 Hz
Power 1 W
Size (HxWxD) Bath only 48 x 45 x 49 cm
Weight Bath only 90 kg
CCCN Code: Tariff 90318080

DETAILS OF METHODS

ISO 7624Petroleum products and lubricants - Inhibited mineral turbine oils - Determination of oxidation stability
BS EN 61125CUnused hydrocarbon-based insulating liquids. Test methods for evaluating the oxidation stability
ASTM D2440Standard Test Method for Oxidation Stability of Mineral Insulating Oil
IP 48Determination of oxidation characteristics of lubricating oil
IP 280Petroleum products and lubricants - Inhibited mineral turbine oils - Determination of oxidation stability
IP 306Determination of oxidation stability of straight mineral oil
BS EN 61125AUnused hydrocarbon-based insulating liquids. Test methods for evaluating the oxidation stability
BS EN 61125BUnused hydrocarbon-based insulating liquids. Test methods for evaluating the oxidation stability

FEATURES

Solid block bath
50 to 400C temperature range
Built in precision temperature control system
12 test wells, 27 mm diameter
Up to 12 simultaneous tests

METHODS

ASTM D2440, BS EN 61125A, BS EN 61125B, BS EN 61125C, IP 280, IP 306, IP 48, ISO 7624

INDUSTRIES

Petroleum - Fuels & Oils

Copyright Stanhope–Seta Limited 2014