Automotive
chevron_rightSeta Universal Penetrometer - 17190-3
Methods
ASTM D5
ASTM D217
ASTM D937
ASTM D1321
ASTM D1403
ASTM D1831
ASTM D7342
IP 49
IP 50
IP 179
IP 310
IP 376
BS 1377
BS 2000-50
BS 2000-179
BS EN 1426 & BS 2000-49
BS EN 13880-2
DIN 51 579
DIN 51 580
ISO 2137
Ph. Eur 2.9.9
A semi-automatic penetrometer with a range of 0 to 640 Pen (64 mm). Plunger release and retention is controlled by a solid state timer which can be set for penetration times of 5, 8, 10, 12, 30 and 60 seconds.
Seta Universal Penetrometer - 17190-3
Features
- Penetration range 0 to 640 Pen (64 mm)
- 5, 8, 10, 12, 30 and 60 second timer settings
- Solid state timer
- Automatic plunger release and retention
- Flexi light
- Semi-automatic operation
- Provision for automatic sample contact detection
- Integral timer
Additional Information
The head is fitted with a two speed elevating mechanism for quick and precise positioning of the penetration tip. Penetration is shown on a precision digital measuring scale with push button zeroing possible at any stage.
The machined aluminium base is fitted with a flexible light with a dimmer switch, and an inbuilt spirit level.
Supplied with;
47.5 g plunger
50 g and 100 g plunger weights
Instruction manual
| Penetration Range | 0 to 640 Pen (64 mm) |
|---|---|
| Penetration Time | 5, 8, 10,12, 30, 60 second selectable |
| Display | Digital 2 decimal places |
| Voltage | 110/120 V and 220/240 V 50/60 Hz |
| Power | 45 W |
| Size (HxWxD) | 53 x 30 x 33 cm |
| Weight | 8.3 kg |
| CCCN Code | Tariff 90248000 |
Industries
Methods
ASTM D5
ASTM D217
ASTM D937
ASTM D1321
ASTM D1403
ASTM D1831
ASTM D7342
IP 49
IP 50
IP 179
IP 310
IP 376
BS 1377
BS 2000-50
BS 2000-179
BS EN 1426 & BS 2000-49
BS EN 13880-2
DIN 51 579
DIN 51 580
ISO 2137
Ph. Eur 2.9.9
| ASTM D1831 | Standard test method for roll stability of lubricating grease |
|---|---|
| ASTM D5 | Standard Test Method for Penetration of Bituminous Materials |
| ASTM D217 | Cone Penetration of Petrolatum |
| ASTM D937 | Standard Test Method for Cone Penetration of Petrolatum |
| ASTM D1321 | Standard test method for needle penetration of petroleum waxes |
| ASTM D1403 | Standard test methods for cone penetration of lubricating grease using one-quarter and one-half scale cone equipment |
| IP 49 | Penetration of Bituminous Minerals |
| IP 50 | Determination of cone penetration of lubricating grease |
| IP 179 | Determination of cone penetration of petroleum |
| IP 310 | Determination of cone penetration of grease - One-quarter and one-half scale cone method |
| IP 376 | Determination of needle penetration of petroleum wax |
| BS 1377 | Methods of test oils for civil engineering purposes |
| DIN 51 579 | Needle Penetration of Petroleum Waxes |
| DIN 51 580 | Cone Penetration of Petroleum |
| ISO 2137 | Cone Penetration of Petrolatum |
| BS 2000-179 | Determination of cone penetration of petrolatum |
| ASTM D7342 | Shear Stability of Lubricating Grease in Presence of Water (Water Stability Test) |
| BS EN 1426 & BS 2000-49 | Bitumen and bituminous binders. Determination of needle penetration |
| BS 2000-50 | Determination of cone penetration of lubricating grease |
| BS EN 13880-2 | Hot applied joint sealants. Test method for the determination of cone penetration at 25°C |
| Ph. Eur 2.9.9 | Measurement of consistency by penetrometry |
