+44 (0)1932 564391

Find your local representative

Setavap 2 Vapour Pressure Tester

Part Number 81000-2

The Setavap 2 automatic vapour pressure tester is used for the measurement of gasoline, solvents, light crude oils, and other similar products using the "Mini" method. Fully evacuated chamber technology guarantees that the sample is tested under a full vacuum, as required by the "Mini" test methods, unlike the expansion technologies that rely on moving pistons.

Simple test procedure:

Calibration and verification equipment availableCalibration and verification equipment available
'Setaalert' remote monitoring compatible'Setaalert' remote monitoring compatible
Setavap 2 Vapour Pressure Tester ASTM IP


Rapid automatic vapour pressure testing
Automatic drain and purge
"Mini" method uses 3ml sample size
Selectable units - kPa or psi
Results available as Ptot, DVPE, EPA, Crude
Audible and on-screen prompts
RS232 interface


ASTM D5191, BS EN 13016-1, BS 2000-394, Correlates with: ASTM D323; ASTM D4953; ASTM D5482; ASTM D6378; IP 69; BS ISO 3007, BS 2000-69, IP 394, IP 481



Petroleum - Fuels & Oils

Crude Oil

Chemicals & Solvents

Copyright Stanhope–Seta Limited 2014